Command - Sun Microsystems Netra 1290 Administration Manual

5. Shutdown the Solaris OS.
6. Power off the server.
7. Power on the server.
To Downgrade the Netra 1290 Server Firmware
Using the lom –G Command
1. Downgrade the firmware on the SC:
# lom –G sgsc.flash
# lom –G sgrtos.flash
2. Use the escape sequence (#.) to obtain the lom> prompt.
3. Reset the system controller.:
lom>resetsc –y
4. Downgrade the firmware on the other boards:
# lom –G lw8cpu.flash
# lom –G lw8pci.flash
5. Shutdown the Solaris OS.
6. Power off the server.
7. Power on the server.
118 Netra 1290 Server System Administration Guide • May 2006