Mounting The Access Point - EnGenius Neutron EWS210AP User Manual

Mounting the Access Point

Using the provided hardware, the EWS AP can be attached to a ceiling or wall.
To attach the AP to a ceiling or wall using the mounting bracket:
1. Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting hardware kit.
2. Insert the provided short screws into the bottom cover of the AP. Leave enough of the screws exposed to ensure
that the unit can be attached to the mounting bracket. If extra space is required, use the provided spacers and long
screws from the T-Rail mounting hardware kit to increase the space between the unit and the mounting bracket.
3. Mount the AP on the mounting bracket by rotating the unit clockwise about 90 degrees to secure it in place.
34