Mounting The Access Point - EnGenius EWS660AP User Manual

Mounting the Access Point

Using the provided accessory, the Access Point can be mounted on a wall or on a pole.
To attach the Access Point to a wall:
1. Attach the location sticker to the desired location on the wall and use a 6mm drill bit to drill the two marked holes.
2. Insert the screw anchors into the 6mm holes drilled then insert and the screws and tighten.
3. Align the access point over the keyhole mounting slots and insert both screw heads into each keyhole slot. Then slide the
access point downward until it's firmly hooked in place.