1. Mesh LED
*
2. 5 GHz LED
3. Power LED
4. 2.4 GHz LED
5. Ethernet Port LED
6. Power LED
7. Reset Button: Press and hold for over 10 seconds to reset to factory default settings.
8. Ceiling/Wall Mount Slots: Using the provided hardware, the Access Point can be mounted to a ceiling or a wall.
9 LAN Port (802.3at PoE): Ethernet Port for RJ45 cable.
10. Power Connector: 12V DC IN for Power
11. Kensington Security Slot: To protect your Access Point, use the Kensington Security Slot to attach a cable lock (not included).
* Mesh networking mode available soon as a free firmware upgrade
16