Management VLAN Settings
This section allows you to assign a VLAN tag to packets. A VLAN is a group of computers on a network whose soft-
ware has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers
on a VLAN do not have to be physically located next to one another on the LAN.
Status
If your network includes VLANs and if tagged packets need to pass through the Access Point, select Enable and en-
ter the VLAN ID. Otherwise, click Disable.
Save
Click Save to apply the changes.
Note: If you reconfigure the Management VLAN ID, you may lose your connection to the AP. Verify that the DHCP server supports the
reconfigured VLAN ID and then reconnect to the EWS AP using the new IP address.
67