Table of Contents
Advertisement
Channel
Select the channel appropriate for your country's regulation.
Transmit Power
Select the transmit power for the radio. Increasing the power improves performance, but if two or more access points
are operating in the same area on the same channel, it may cause interference.
Data Rate
Use the drop-down list to set the available transmit data rates permitted for wireless clients. The data rate affects
the throughput of the access point. The lower the data rate, the lower the throughput, but the longer transmission
distance.
RTS/CTS Threshold
Specifies the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more often and
consumes more bandwidth. The range is from 1~2346.
Client Limits
Click the bubble to enable or disable the client limit. The Client lists limits the total number of clients per frequency
band.
Aggregation
Merges data packets into one packet. This option reduces the number of packets, but also increases packet sizes.
AP Detection
AP Detection can select the best channel to use by scanning nearby areas for Access Points.
53
Hide quick links:
Advertisement
Table of Contents
