EnGenius Neutron EWS210AP User Manual page 12

Wireless Management Features
Web-based support
Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Band Steering
Traffic Shaping
Fast Handover
Seamless Roaming (requires RADIUS server)
Access Point Client Limiting
Mesh Network*
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Visual Topology View
Floor Plan View
Map View
Secure Control Messaging
SSL Certificate
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics
Tx Power Control:
Adjust transmit power by dBm
Configuration:
Web-based configuration (http)
Firmware Upgrade:
Via web browser, settings are reserved after upgrade
Administrator Settings:
Administrator Username and Password Change
Reset Settings:
Reboot (press and hold for 2 seconds).
Reset to factory default (press and hold for 10 seconds)
System Monitoring:
Status Statistic and Event Log
SNMP:
V1, V2c, V3
MIB:
MIB I, MIB II (RFC1213) and private MIB
Traffic Shaping:
Incoming and outgoing wireless traffic shaping
LED Control:
On/Off
AP Detection:
Scanning for available EnGenius APs
Auto-channel Selection:
Automatically selecting least congested channel
Bandwidth Measurement:
IP range and bandwidth management
12