Syscom Video IR Dome Network Camera Instruction Manual page 59

• Logs
The network Camera support system log information. Click the System Log button to get the log
data.
• Reports
- Server Report: Click the Server Report button to get the important information about the
server's status and should always be included when requesting support.
- Parameter List: Click the Parameter List button to see the unit's parameters and their
current settings.
• Health Check
- System Check: Click the System Check button to get the important information about the
camera's system resources. You can see the pop-up window below.
- Media Check: Click the Media Check button to get the information about the camera's video
stream. You can see the pop-up window below.
59