Active Processor Cores; Limit Cpuid Maximum; Intel Virtualization Technology - DFI CR100-CRM User Manual

Dfi cr100-crm system board user’s manual
Hide thumbs Also See for CR100-CRM:
Table of Contents

Advertisement

3
BIOS Setup
CPU Confi guration
This section is used to confi gure the CPU. It will also display the detected CPU
information.
CPU Confi guration
Intel (R) Core (TM) i7-3610QE CPU @ 2.30GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Hyper-threading

Active Processor Cores

Limit CPUID Maximum

Intel Virtualization Technology

Hyper-threading
Enable this fi eld for Windows XP and Linux which are optimized for Hyper-
Threading technology. Select disabled for other OSes not optimized for Hyper-
Threading technology. When disabled, only one thread per enabled core is
enabled.
Active Processor Cores
Number of cores to enable in each processor package.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater than
3. The default is Disabled because this problem does not exist in the Win-
dows series operating systems. If you are using an operating system other
than Windows, this problem may occur. To avoid this problem, enable this
fi eld to limit the return value to 3 or less than 3.
Intel Virtualization Technology
When this fi eld is set to Enabled, the VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
64
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
306a8
7
2300 MHz
1200 MHz
2300 MHz
4
Supported
Supported
Supported
Supported
32 kB x 4
32 kB x 4
256kB x 4
6144 kB
[Enabled]
[All]
[Disabled]
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit

Advertisement

Table of Contents
loading

Table of Contents