Sata (Serial Ata) Connectors - DFI CR100-CRM User Manual

2
Hardware Installation

SATA (Serial ATA) Connectors

Features
• 4 Serial ATA ports
- 2 SATA2 ports with data transfer rate up to 3Gb/s
- 2 SATA3 ports with data transfer rate up to 6Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
• Supports RAID 0, RAID 1, RAID 5 and RAID 10
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
BIOS Setting
Confi gure the Serial ATA drives in the Advanced menu ("IDE Confi guration" sub-
menu) of the BIOS. Refer to chapter 3 for more information.
46
7 1
SATA 3.0 6Gb/s
SATA 0
SATA 1
SATA 4
SATA 5
SATA 2.0 3Gb/s