Watchdog Timer - DFI CR100-CRM User Manual

Dfi cr100-crm system board user’s manual
Hide thumbs Also See for CR100-CRM:
Table of Contents

Advertisement

F71879 Super IO Confi guration
This section is used to confi gure the I/O functions supported by the onboard
Super I/O chip.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
F71879 Super IO Confi guration
F71879 Super IO Chip
Restore AC Power Loss

Watchdog Timer

Super IO Watchingdog Timer
 Serial Port 1 Confi guration
 Serial Port 2 Confi guration
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Restore AC Power Loss
Off
When power returns after an AC power failure, the system's power is off. You
must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically
power-on.
Last State
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system's power
is off when AC power failure occurs, it will remain off when power returns.
If the system's power is on when AC power failure occurs, the system will
power-on when power returns.
Watchdog Timer
Enable or disable Super I/O watchdog timer.
Fintek F71879
[Power Off]
[Disabled]
10
BIOS Setup
Restore AC Power Loss
help.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
ESC: Exit
3
75

Advertisement

Table of Contents
loading

Table of Contents