2.5.4 Changing the Baud Rate
The EVB's default baud rate for the RS-232C port is 9600. This can be changed in two ways:
• For temporary changes, use the D-Bug12 BAUD command. This change remains in
effect only until the next reset or power-up, at which time the baud rate returns to
9600.
• For permanent changes, the D-Bug12 baud-rate initialization value stored in Flash
EEPROM must be modified. For instructions, refer to Appendix D D-Bug12
Customization Data and Appendix E EEPROM Bootloader.
68EVB912B32UM/D
CONFIGURATION AND SETUP
2-5