Table of Contents
Advertisement
MACTERMINAL — APPLE MACINTOSH
Setup
To set up MacTerminal on an Apple MacIntosh computer for use as the EVB terminal, first refer
to section 3.2 for the EVB startup procedure, which is inter-related with this example. Then
follow these steps:
1. Select the following from the Terminal Settings menu:
Terminal:
Cursor Shape:
Line Width:
Select:
Click on:
2. Select the following from the Compatibility Settings menu:
Baud Rate:
Bits per Character:
Parity:
Handshake:
Connection:
Connection Port:
Click on:
3. Reset the EVB by pressing S1 or by activating the appropriate custom reset circuitry.
4. Press <ENTER>. The D-Bug12 prompt should appear on the display. Continue with
the startup procedure in section 3.2.
S-Record Transfers to EVB Memory
To load an S-Record file from the host computer into EVB memory using MacTerminal, first
verify that the host is correctly configured and operating as the EVB terminal. Then follow these
steps:
1. At the D-Bug12 prompt, enter the LOAD or VERF command with any parameters.
2. From the MacIntosh File menu, select Send File - ASCII.
3. From the dialog box, select the S-Record file to be transferred.
68EVB912B32UM/D
COMMUNICATIONS PROGRAM EXAMPLES
TTY
Underline
80 Columns
On Line
Auto Repeat
OK
9600 (or the customized EVB setting)
8 Bits
None
None
Modem or Another Computer
Modem or Printer
OK
B-5
Advertisement
Table of Contents
