Freezer Features - Kenmore Freezer Use & Care Manual

INTERIOR LIGHT
The light comes on automatically when the door is
opened. To replace the light bulb, turn the temperature
control to OFF and unplug the electrical cord. Replace
the old bulb with a bulb of the same wattage.
dRAWER WITH
AdjUSTABLE
dIvIdERS
The drawer, located at
the bottom of the freezer,
provides separate
storage space for items
that are difficult to store
on freezer shelves.
TILT-OUT
SHELF
This shelf is located
inside on the freezer
door and provides
additional storage
space. To access
an item, tilt top of
"basket" shelf down.
AdjUSTABLE
INTERIOR
SHELvES
Multi-position
adjustable interior
shelves can be
moved to any
position for larger or
smaller packages.
The shipping spacers
that stabilize the
shelves for shipping
may be removed and
discarded.

Freezer Features

Lift up
and out
Adjustable Interior Shelves - Upright Models
TO AdjUST CANTILEvER SHELvES
NOTE
Cantilever shelves are supported at the back of the
freezer.
1 Lift front edge up.
2 Pull shelf out.
Replace the shelf by
inserting the hooks at
rear of the shelf into the
wall bracket. Lower the
shelf into the desired slots
and lock into position.
MId LEvEL LIGHT
The light comes on automatically when the door is
opened. To replace the light bulb, turn the temperature
control to OFF and unplug the electrical cord. Remove
the lens from the lamp housing by unsnapping it from
the lamp housing using your fingers or a screwdriver. Be
careful not to break the locking tabs on the lamp housing.
Replace the old bulb with a bulb of the same type and
wattage. To replace the lens, snap one side of the lens
opening to the tab on the lamp housing. Then carefully
attach the other side.
7
1
2