Table of Contents
Advertisement
XL
DÉSA
| Instruction Manual | System Setup Options
#
Name
1
Surveillance
2
Control Out
3
Area No.
4
Send E-mail
5
Audio Dial Out
6
Never Update Background Background of the detection area does not refresh.
7
Name
8
Background Refresh Time
9
Detection Size
10 Detection Sensitivity
11 Sound Wave File
12 Duration of Sound Wave
13 Set Active Time
14 Reset & Add All
15 Reset
16 Hide (or Show) Objects Click to display/Hide the pixel detection area.
Bosch Security Systems | November 17, 2004
Function
Surveillance allows six (6) independently configurable areas of detection to be set.
Each area can be configured to send an E-mail, make a phone call, play a sound
file, and trigger a control output.
Allows the activity to trigger a Control Output.
Displays the area of detection currently being configured.
E-mail Setup must be configured for E-mail to function. Refer to E-mail Setup (in
this manual).
If a modem is connected to the system, the system can dial out to a remote PC
with the DESA remote running.
Assign a name to the detection area.
Seconds of time to refresh the image being captured.
The number of pixels used for detection of an object.
Sensitivity of the pixel area of the Detection Size.
Select a .WAV file to be played if an object is detected.
Duration that the sound should play.
Click to allow a specific time to be set for the area to be active. This is set on an
hourly basis.
Click to delete all areas and selects the entire picture area.
Click to remove all items in the picture area.
EN | 47
Advertisement
Table of Contents
