Table of Contents
Advertisement
XL
EN | 25
DÉSA
| Instruction Manual | System Setup Options
8.4.10 Transfer Quality
Transfer Quality affects the amount of network bandwidth used, by compressing
the images requested from a Remote Client, for live display. This precompresses
the images before streaming to the Remote Client. The settings are 100%, 90%,
70%, 50%, and 30%. This setting does not have any affect on streaming video
being searched from the remote, only streaming video being viewed live at the
remote.
8.4.11 Color of Motion Area
The selections to visually indicate that motion has been detected are
Red or Green.
8.4.12 Full Screen When Motion
Select cameras in the dropdown list to cause those cameras
to display full screen when motion is detected. Set the
Dwell Time for the video to remain full screen. Once the motion
has stopped and the dwell time has expired, the video reverts to
the previous multiscreen display. Click No Full Screen to clear
the selected cameras from being displayed full screen.
8.4.13 Set Quad Dwell Time
On the main monitor display there is a button that allows
sequencing of the quad displays. This Dwell Time designates the
duration of the quad's display (in seconds), before switching to
the next quad display.
8.4.14 Recording Frame Rate per Camera
The capability of maximum frame rate is based upon
your system and the number of cameras connected and
enabled. Click Default to maximize the total available
frame rate to all cameras. Adjust the frame rates by
clicking and holding the slide bar, and moving it up or
down (system specific limitations may exist).
Bosch Security Systems | November 17, 2004
Advertisement
Table of Contents
