Table of Contents
Advertisement
XL
DÉSA
| Instruction Manual | System Setup Options
8.5.2.7
Record Modes
•
Continuous
The Continuous record mode records the selected cameras continuously (nonstop).
•
Motion
The Motion record mode records based on any changes made in the camera view. There may be large
gaps in the recording time if no motion is detected.
•
Sensor (alarm)
Sensor record mode activates recording based on alarm input activation, for the duration set forth in the
Hardware Setup Tab for Alarm Setup.
•
Motion + Sensor
Motion + Sensor records based on activation from Motion and/or an alarm triggered input.
•
Motion + Prealarm
Recording based on Motion, adding an additional five (5) seconds of video prior to the Motion trigger.
The five (5) seconds is global and cannot be adjusted.
•
Sensor + Prealarm
Recording based on Sensor input activation, adding an additional five (5) seconds of video prior to the
Sensor. The five (5) seconds is global and cannot be adjusted.
•
Motion + Sensor + Prealarm
Combines the recording capabilities based on Motion or Sensor activation, adding the five seconds of
video prior to the Motion or Sensor recording triggers. The five (5) seconds is global and cannot be
adjusted.
•
None
If no record mode is selected, the specified camera will
not record. This could be used during down times when
recording is not necessary, to conserve storage capacity.
8.5.2.8
Copy To
Copy to is designed to speed the setup process of
the schedule. If you set up the schedule for one
camera, and want to copy it to either another
camera, or all cameras, click Copy to and select
the appropriate camera option to copy to.
Bosch Security Systems | November 17, 2004
C
M
S
M:S
M:P
S:P
M:S:P
NONE
EN | 29
Advertisement
Table of Contents
