Bosch DESAXL Instruction Manual page 62

XL
DÉSA | Instruction Manual | Remote Client Guide
10.3.1 Setup Button (before connection)
Setup is done while no connection is active for a DÉSA
Server.
10.3.1.1 About DÉSA
Provides a summary of pertinent system information.
10.3.1.2 Setup Configuration Tab
# Option
1 Modem Connection,
Reconnect Automatically
Display Auxiliary Status
2
BAR
3 Watermark
4 Remote Video Recording Live video storage designation: on the remote PC (for later search and review), or streamed from the
Bosch Security Systems | November 17, 2004
XL
Remote Tab
Description
XL
When checked, the DÉSA automatically re-establishes the modem connection, in the event it is
lost. A designated number of connection retries cab be indicated.
For a connected server, this shows/hides the Alarm and Auxiliary icons below the Camera icons .
Watermarked is displayed in the view of searched video on the Remote Client.
server.
A. Record live video
If checked, video displayed during a remote connection is also written to the local hard drive
storage specified by the Select Drive setting.
NOTE: This consumes disk space at a fairly rapid rate, and may fill up local hard disk storage
if left connected!
B. Save recorded video on search
If checked, searched video is automatically written to local storage (same as Record live video).
Video that is recorded live, or in response to a search, is available for review via Search when
the Remote Client is disconnected from all DÉSA
C. Select Drive
Select Drive designates the storage location for recorded video. It is strongly recommended to choose
a drive other than the system drive of the Remote Client, to avoid filling up the system drive.
1
2
3
4
XL
Servers.
EN | 62