Table of Contents
Advertisement
XL
DÉSA
| Instruction Manual | Remote Client Guide
10.4.4.3
Backing up Video from
•
A single screen shot may be saved to a floppy disk as either
BMP or JPEG:
1. Stop playback.
2. Click on a single Camera, for full screen view.
3. Click BACKUP, then the Floppy Disk icon.
4. Click OK to save the displayed image as either BMP or
JPEG, depending on the Remote Viewer.
•
Backup a clip of video as follows:
NOTE: The video is backed up in blocks of 66 MB. Time required
varies with hardware settings of the local DÉSA
1. Stop Playback.
2. Ensure that the video is being displayed in Multi-screen mode.
3. Click on the Floppy Disk icon.
4. Select the Start Date/Time, and End/Date/Time.
5. Select the Backup Media, then click OK.
6. After a few seconds, a small VCR tape symbol should
appear at the top right-hand side of the monitor. Double-
click this symbol to check the backup progress.
AVI backup requires the following steps:
•
1. Save a full backup clip, as above.
2. Disconnect from the local DÉSA
SEARCH (See SECTION 10.4.4.4).
3. Select the Backup Media for saving the video.
4. Select the desired Date/Time.
5. Select the Cameras to be viewed, then click
PLAY.
6. Stop playback, click Backup, then the Floppy
Disk icon.
7. Now click the AVI radio button and choose the
individual Camera to be saved in AVI format.
8. Click OK, a small VCR symbol will appear
indicating that the backup is in process. This is
the only indication of progress during an AVI
backup.
Bosch Security Systems | November 17, 2004
XL
Local
DÉSA
XL
.
XL
, then click
EN | 69
Advertisement
Table of Contents
