Initial Power-Up Administrative Access - Bosch DESAXL Instruction Manual

XL
DÉSA | Instruction Manual | Initial DÉSA

6.3 Initial Power-up Administrative Access

Initial Power-up: The DÉSA
User. In order to make any changes to the operating system, including the IP Address, you must logoff, and
login as the Administrator.
To Login as the Windows ADMINISTRATOR:
6.3.1
Login to the DÉSA Application as the Administrator.
6.3.2 Exit the DÉSA Application as follows:
Push and hold CTRL/ALT/SHIFT, and then F4 to exit the DÉSA Application only if
you are the Administrator.
6.3.3
Click START and logoff. When promted, if you are sure, click logoff and IMMEDIATELY hold down
the left SHIFT key.
6.3.4
The logon to Windows dialog appears.
6.3.5 The Username and Password are as follows:
a. Username: administrator
b. Password: desa
6.3.6 Windows will logon as the Administrator and immediately prompt for a new password. This is
recommended for security reasons.
a. Username: Administrator
b. New Password:
WARNING: If you forget your Windows password, a recovery procedure will be required to reset the
default password.
Bosch Security Systems | November 17, 2004
XL
Power-up
XL
runs on a Windows XP Professional Platform, and starts up under the DÉSA
EN | 15
XL