Delivery; Storage; Storage Of The Ups - GE LP 33 Series Operating Manual

4.2

DELIVERY

When delivered, check carefully the package integrity and the physical conditions of the UPS
equipment.
In case of any damage sustained during transport, immediately inform the carrier and contact your
local Service Centre.
A detailed report of the damage is necessary for any insurance claim.
NOTE !
A damaged UPS must never be installed or connected to mains or battery!
4.3

STORAGE

4.3.1

Storage of the UPS

Some important functions of the UPS, such as the customised functions, are defined by parameters
stored in a RAM memory.
The RAM is supplied by a small backup battery located on the Control Unit board.
If the storage time of the UPS exceeds 1 year, these functions should be verified by an authorised
Service Centre before putting the UPS into operation.
NOTE !
In case of storage of the UPS pay attention to:
Modifications reserved
OPM_LPS_33E_10K_30K_4GB_V030.doc
The equipment is carefully packed for
transport and storage so that it is in a
perfect condition when eventually installed.
Never leave an UPS outside the building and
do not store the UPS one on top of the other.
It is recommended to store the UPS in its
original package in a dry, dust free room
and far away from chemical substances,
with temperature not exceeding -25°C to
55°C (-13°F to 131°F).
SENSITIVE
FRAGILE
TO DAMPNESS
Operating Manual LP 33 Series / 10-20-30 kVA
SENSITIVE SENSITIVE
TO HEAT TO FROST
Page 21/85