User Parameters Screen - GE LP 33 Series Operating Manual

7.3.1

User parameters screen

This screen allows the user to modify some parameters permitting to adapt some functions of the UPS
to his/her needs, described as follows.
This screen can be accessed by entering MENU/PARAMETER MENU/LEVEL 1: USER and confirming with
the key Enter.
In PARAMETER MENU the buttons + / - / Enter perform the following functions:
+ This key allows to scroll forward to the next screen and, once the key Enter has been pressed,
to move the horizontal selection to the next editable position.
- This key allows to move the selection to the next parameter and, once the key Enter has been
pressed, to change the value of the selected character by the underscore cursor.
Enter Start the editing for the currently selected parameter.
1. Date and time set-up
DATE AND TIME
D M
Date: 01.01.2006
Hour: 12:15:45
2. Modem protocol set-up
PROTOCOL SETUP
Modem enabled = N
Init=BEQV1X3&D0S0=2
Alarm=N Delay=30s
4. Alarm: Y/N controls the automatic events signalling through modem.
If this parameter is set to Y (yes) the UPS itself will call the remote location when a new
event occurs.
Delay: This parameter controls the delay between the occurrence of a new event and the
modem dialling.
It is useful because since the events typically do not occur isolated but in certain
sequences, you can eliminate the need for multiple dial-outs for such a sequence of
events.
Modifications reserved
OPM_LPS_33E_10K_30K_4GB_V030.doc
PARAMETER MENU
LEVEL 1: USER
LEVEL 2: SERVICE
1. Date and time setup.
2. D = Day
Y
3. Date set-up: the set value is thoroughly checked to be
4. Time set-up:
1. Modem protocol set-up.
2. Y: enables
3. Init: this parameter presents the modem initialisation string.
M = Month
acorrect format "dd.mm.yyyy".
the set value is thoroughly checked to be
acorrect format "hh.mm.ss".
The time is specified in 24 hour format.
or N: disables the modem call.
It can be 39 characters long and considers that a blank
character terminates the string.
If no blank character is found then all 39 characters are
used
Y = Year.
Page 51/85
Operating Manual LP 33 Series / 10-20-30 kVA