Specification - JTS KA-10R Instruction Manual

3. Specification
3-1 Wireless Camera Receiver// KA-10R
Frequency Preparation......
Carrier Frequency Range...
LED Display...................
Controls.........................
Audio Frequency Response
Output Connector.............
Battery Life.....................
Battery..........................
Dimension(mm)...............
3-2 Wireless Camera Transmitter// KA-10T
Internal Microphone..........
Frequency Preparation......
Carrier Frequency Range...
RF Outputs.....................
Stability.........................
Frequency Deviation.........
LED Display....................
Controls.........................
Spurious Emissions...........
Audio Frequency Response
Microphone Input Connector
Battery Life.....................
Battery..........................
Dimension(mm)...............
PLL Synthesized Control
502~960 MHz
Channel
Power On/Off, Channel selection, Volume control
40~18,000 Hz
1/8" Dummy stereo Phone Jack
14 hours typical
Lithium cell (3.7V, 1300mAh)
54mm(W)* 17mm(D)* 99mm(H)
Omni-directional Condenser Microphone
PLL Synthesized Control
502~960 MHz
10mW
±10kHz
±48kHz
Channel
Power On/Off, Channel selection, Volume control
<-50 dBC
40~18,000 Hz
1/8" Mono Phone Jack
14 hours typical
Lithium cell (3.7V, 1300mAh)
54mm(W)* 17mm(D)* 99mm(H)
02