Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. Introduction With HDMI & USB over CAT5e/6 connectivity are becoming popular nowadays. The growing need for their flexibility has likewise risen in demand. The HDMI & USB over a CAT5e/6 transmitter and receiver box solution is developed for any household and/or commercial environment. This pair of devices allows HDMI and or USB host device to send data within a 100-meters distance while offering expandability for up to 4 USB outputs to perform tasks.
4. System Requirements Input HDMI and or USB source equipment such as DVD, Blue-Ray player and or PC/Notebook with connection cables. Output display such as HD TV, monitor and or PC/Notebook, active speaker, amplifier and connection cables. CAT5e/6 cable up to 100Ms in between of transmitter and receiver. ...
6. Specifications Transmitter Input Port 1 x USB (B type) 1 x HDMI 1 x IR Blaster 1 x RS-232 Output Port 1 x RJ45 Receiver Input Port 1 x RJ45 Output Ports 4 x USB (A type) 1 x HDMI 1 x RS-232 1 x IR Receiver 1 x 3.5Ø...
7. Operation Controls and Functions 7.1 Transmitter’s Front Panel POWER LINK PAIR LINK SELECT HDMI/USB/IR/RS232 to CAT5e/6 Transmitter ① ② ③ ① Power LED: The red LED will illuminate when the device is connected with power. ② Link LED: The LED red will illuminate when the device has received input source single and output display ’...
7.3 Receiver’s Front Panel POWER VIDEO LINK MODE CAT5e/6 to HDMI/USB/IR/RS232 Receiver ① ② ③ ④ ⑤ ⑥ ① Power LED: The red LED will illuminate when the device is connected with power. ② Link LED: The LED red will illuminate when the device has received output display ’...
7.4 Receiver’s Rear Panel AUDIO HDMI OUT DC 5V RS 232 OUT CAT5e/6 IN ① ② ③ ④ ⑤ ⑥ ① DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet. Power LED will illuminate when the power is on. ②...
Need help?
Do you have a question about the CA-USBHUT and is the answer not in the manual?
Questions and answers