Configuring Additional Snmp Information; Using Diagnostic Tools - Cisco RV 120W Administration Manual

Administering Your Cisco RV 120W

Using Diagnostic Tools

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2

Using Diagnostic Tools

Cisco RV 120W Administration Guide
To configure access control rules:
In the Access Control List Table, click Add.
Enter the IP Address of the specific SNMP manager or trap agent on which to
create an access rule.
Enter the subnet mask used to determine the list of allowed SNMP managers.
Enter the community string to which the agent belongs. Most agents are
configured to listen for traps in the Public community.
Choose the access type. The SNMP manager or trap agent can either be allowed
to read and modify all SNMP accessible settings (rwcommunity) or be given read-
only access (rocommunity).
Click Save.

Configuring Additional SNMP Information

To configure additional SNMP information:
Choose Administration > Network Management > SNMP System Information. This
page displays the current SNMP configuration of the router. The following MIB
(Management Information Base) fields are displayed and can be modified:
• SysContact—Enter the name of the contact person for this router. Examples:
admin, John Doe.
• SysLocation—Enter the physical location of the router. Example: Rack #2,
4th Floor.
• SysName—Enter a name for easy identification of the router.
Click Save.
The Cisco RV 120W provides several diagnostic tools. To access these tools,
choose Administration > Network Tools.
7
130