Configuring The Logging Type And Notification - Cisco RV 120W Administration Manual

Administering Your Cisco RV 120W
Configuring Logging
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV 120W Administration Guide
• Respond to Identd from SMTP Server—Check this radio box to configure
the router to respond to an IDENT request from the SMTP server.
• To confirm that the e-mail logs function is configured correctly, press Test.
Send E-mail logs by Schedule
To receive e-mail logs according to a schedule, configure the appropriate
schedule settings:
• Unit—Select the period of time that you need to send the log: Hourly, Daily,
or Weekly. To disable sending of logs, select Never. This option is useful
when you do not want to receive logs by e-mail, but want to keep e-mail
options configured so that you can use the Send Log function from the
Status > View Logs pages.
• Day—If logs are to be sent on a weekly basis, choose the day of the week.
• Time—Select the time of day when logs should be sent.
Syslog Server
If you want the router to send logs to a Syslog server, enter the IP address or
Internet Name of the Syslog server in the Syslog Server field. You can configure up
to 8 Syslog servers.

Configuring the Logging Type and Notification

There are a variety of events that can be captured and logged for review. These
logs can be sent to a server or e-mailed as configured. To configure, choose
Administration > Logging > Logs Facility:
Select the type of functionality from which to generate logs: Kernel, System, or
Local0-wireless.
Select the events to log: Emergency, Alert, Critical, Error, Warning, Notification,
Information, Debugging.
For each of these events, select how to receive notification: Display in Event Log,
Send to Syslog.
Click Save.
7
134