Configuring Radius Authentication Parameters; Configuring Access Points; Enabling Or Disabling Aps - Cisco RV 120W Administration Manual

Configuring the Wireless Network

Configuring Access Points

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Configuring Access Points
Cisco RV 120W Administration Guide
Choose Wireless > AP Profile.
Check the box in the row of the profile you want to configure and click Advanced
Configuration.
Specify the number of seconds that the master keys are stored in the AP.
In the 802. 1 X re-authentication interval field, enter the timeout interval (in seconds)
after which the AP should re-authenticate with the RADIUS server.
Click Save.
To configure the APs, choose Wireless > AP Profiles. The four APs are displayed in
the Access Points Table.

Enabling or Disabling APs

An AP can be disabled if not in use and enabled when needed. Disabling an AP
does not delete the configuration, but removes it from availability. Enabling the AP
creates a wireless network, where computers and other devices can join and
communicate with the devices connected to the AP or other devices on the Local
Area Network (LAN).
3
66