Configuring Security - Cisco RV 120W Administration Manual

Introduction
Connecting the Equipment
STEP 5
STEP 6
STEP 1
STEP 2
NOTE
Cisco RV 120W Administration Guide
• PPTP (Europe)—Provide your account name (for example,
john@ISPname.net
entering the information.
• L2TP (Europe)—Provide your account name (for example,
john@ISPname.net), password, and server IP address. Click Next after
entering the information.
The Setup Wizard configures your connection, verifies the router settings, and
checks the network connection. Click Next.
To configure your home network, click Next.

Configuring Security

Enter a new Cisco RV 120W administration password and click Next. For security
reasons, you should not use the default password. Follow these password
guidelines:
• Passwords should not contain dictionary words from any language or the
default password.
• Passwords should contain a mix of letters (both upper- and lowercase),
numbers, and symbols.
• Passwords must be at least 8 but no more than 30 characters.
• Password security ratings are shown to the right of the password you enter,
and are rated from weak to secure. Cisco recommends using a password
rated as secure.
Enter a name (SSID) for your wireless network and click Next. You should change
the default SSID to a unique name. The SSID is case-sensitive.
For added security, disable broadcasting of the SSID. You can disable SSID
broadcast using the Device Manager; see
), password, and server IP address. Click Next after
Editing an AP's Properties, page
1
67.
14