Table of Contents
Advertisement
Remote Operation
When the switch on the battery holder is set to "REMOTE" the transmitter operates the fireplace. Once
you understand how the transmitter works, you will be able to operate your fireplace quickly and easily.
Display Overview
The transmitter display has four main sections (see Figure 5).
Thermostat Display
ON
Listen for the "Beep"
Each time you press a button on the transmitter that controls the fireplace, a "beep" will sound from the
IFC. When you change thermostat target settings the IFC will not beep.
NOTE: When the batteries start to get low, the IFC will beep twice whenever a button is pressed. When
the batteries are nearly depleted, the IFC will no longer beep. See "IFC Batteries" on page 39).
© Travis Industries
Operation
Room Temperature Display
F
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame, Blower, Light, Comfort Control)
Figure 5
4140811
35
100-01331
Advertisement
Table of Contents
