Setup Menu List; Camera Setup - Panasonic AG-MDR15P Operating Instructions Manual

Setup menu list

When the [SYSTEM FREQ] (Page 94) setting in [OTHER FUNCTIONS] is changed, the [SYNCRO SCAN]
(Page 84), [REC FORMAT] (Page 86) and [HDMI OUT SEL] (Page 89) settings are changed to the factory
default.

CAMERA SETUP

Item
SYNCRO CAM
SCAN
DETAIL LEVEL CAM
V DETAIL CAM
LEVEL
DETAIL CAM
CORING
CHROMA CAM
LEVEL
CHROMA CAM
PHASE
COLOR TEMP CAM
MASTER PED CAM
A.IRIS LEVEL CAM
DRS CAM
84
Display
mode
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
When
or
When [SYSTEM FREQ] is set to [59.9Hz]
•
60P/60i:
1/60.0...1/250.0 (Factory default setting is 1/60.0)
•
30P:
1/30.0...1/48.0...1/250.0
•
24P:
1/24.0...1/48.0...1/250.0
When [SYSTEM FREQ] is set to [50Hz]
•
50P/50i:
1/50.0...1/250.0 (Factory default setting is 1/50.0)
•
25P:
1/25.0...1/48.0...1/250.0
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
-7...0...+7
Adjusts the level of outline correction in the vertical direction.
-7...0...+7
Adjusts the level of noise reduction for the detail signal.
-7...0...+7
Set to – for a clearer image. The noise will increase slightly.
Set to + to reduce noise.
Adjusts the chroma level.
-7...0...+7
Makes fine adjustments to the chroma phase.
-7...0...+7
Makes fine adjustments to the color temperature.
-7...0...+7
•
This item is available when W.SET mode is selected in "Setting the white
balance" on page 53.
Adjusts the master pedestal (black level of the image) that is used as the basis
for images.
-15...0...+15
Sets the desired auto iris level.
-10...0...+10
Sets the DRS (Dynamic Range Stretcher) function.
The dynamic range can be expanded by compressing the level of the video
signals in high-brightness areas where overexposure occurs during normal
shooting.
OFF, 1, 2, 3
•
The higher the setting, the higher the compression level of the high-brightness
areas.
•
The higher the setting, the greater the noise in the darker areas.
Description of settings
is pressed and held, the settings change at a faster rate.
indicates the factory default setting.