Screen Displays; Regular Displays - Panasonic AG-MDR15P Operating Instructions Manual

Screen displays

Regular displays

3
4
5
6
7
8
9
10
11
12
15
1 Time code display (Page 41)
When the COUNTER function is assigned to
the [USER] button, each time you press the
[USER] button, the display switches to the
following data (or no indication).
• There is no output to external devices.
0 : 00 . 00/CLIP 0 : 00 . 00
Counter value
You can switch the counter display by
selecting [REC COUNTER] → [TOTAL] or
[CLIP] in the [DISPLAY SETUP] setup menu.
ā 0 : 00 . 00 (When [TOTAL] is selected):
Counts (displays) the recording time
continuously.
ā CLIP 0 : 00 . 00 (When [CLIP] is selected):
Counts (displays) the recording time for each clip.
The counter display in PB mode is set
automatically to CLIP to count (display)
the playback (recording) time for each clip.
TC 12 : 34 : 56 . 01
Time code
ā When the time code value cannot be
loaded correctly from the SD Memory
Card, [TC ∗ ] is displayed.
UB 12 34 56 78
User information
ā When user information cannot be loaded
correctly from the SD Memory Card, [UB ∗ ]
is displayed.
2 Media information display
Displays basic information about the inserted
SD Memory Card.
: Recording possible
: Card is write-protected
72
2 1 30 29
TC 12 : 34 : 56 . 00 SDI
–
112 min P REC
D10X
PH 1080
60
EXPANDED
ALC
R
OCT 10 2009 17 : 20 : 00
24P 1 / 60
C
1
F
H
C
2
H
13 14 16
For details on the safety zone, see 32. (Page 76)
28 27
P3.2 K
18dB
MARK OFF
SPOT MF 69
F2.1 Z99
17 18 _
VOLUME
[
: Recording not possible
: Card is full
ā Recording may be possible in some cases
even when this icon is displayed.
ā Depending on the memory size and
type of the SD Memory Card used, this
icon may not be displayed even when
the card's memory becomes full during
recording and the recording is stopped.
: Playback-only
SD Memory Cards already containing
1,000 or more clips can be used for
playback only.
: Accessing card
: No card inserted
3 Media capacity display
Displays the remaining capacity for the
recording frame rate set in [REC FORMAT] in
the [RECORDING SETUP] setup menu.
Not displayed during PB mode.
• The time displayed is a guideline only.
• You can switch between displaying and
not displaying this information by selecting
[CARD & BATTERY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
26
25
24
23
22
21
19 / 20
31
[ + ]
]