Table of Contents
Advertisement
Tally lamp
The tally lamp turns on during recording (orange).
Also, the tally lamp flashes in the following
circumstances.
(flashes 4 times per second)
• Recording error has occurred
• SD Memory Card is full
• System frequency has been changed
(flashes once per second)
• Remaining memory of the SD Memory Card is low
• Setup menu has been initialized (Page 28)
■
When the AG-MDC10G camera head
(optional) is connected
The tally lamp flashes in the following circumstances.
(flashes 4 times per second)
• Cooling fan is not operating correctly
• Internal temperature of the camera is abnormally high
• Recording signal is corrupted
• Optical Image Stabilizer is not operating correctly
• Problem with the focus function
• Camera cable is disconnected
SD Memory Card access lamp
The SD Memory Card access lamp lights as
follows depending on the access condition of the
SD Memory Card in the portable recorder.
■
REC mode, PB mode
Illuminated orange:
Flashing orange (fast):
Flashing orange (slow): Accessing card
Off: No card inserted/unformatted or incompatible
card inserted
■
PC mode
Flashing orange (slow): Accessing card
Off: A status other than accessing
Reading/writing possible
Verifying card/inspecting
card for possible defects
(recording, playing back
or loading)
Tally lamp
REC/
PAUSE
SD Memory Card access lamp
• Do not perform any of the following operations
while the SD Memory Card access lamp is
flashing.
Performing these operations may damage the
SD Memory Card or its contents, or cause the
portable recorder to fail to operate correctly.
ā Removing the SD Memory Card
ā Switching off the power
ā Connecting or disconnecting the USB
connection cable
ā Shaking or striking the recorder
AUDIO MON/ADV
REC/
PAUSE
25
Advertisement
Table of Contents
