Power Sources; Using The Ac Adapter - Panasonic AG-MDR15P Operating Instructions Manual

Power sources

Using the AC adapter

Installation
1
Connect the DC cable to the AC adapter.
2
Plug the AC power supply cable into the
power outlet.
3
Insert the DC cable plate into the DC cable
attachment compartment of the portable
recorder until it clicks into place.
Removal
1
Press the [POWER] button for 2 seconds or
longer to turn off the power. Check that the
POWER lamp goes off.
2
Remove the DC cable plate while pressing
the DC cable attachment release button and
sliding the DC cable plate in the direction of
the button.
DC cable attachment release button
3
Disconnect the AC power supply cable from
the power outlet.
• The AC adapter is designed to be compatible
with all power supply voltages (100 V to 240 V)
and power supply frequencies (50 Hz, 60 Hz)
around the world. Note that the shape of the
power outlet varies depending on the country.
Use a plug that is suitable for the country of use.
Contact a Panasonic authorized service center
for assistance in selecting a converter plug.
• Disconnect the AC power supply cable from the
power outlet when not using the portable recorder.
POWER lamp
23