Table of Contents
Advertisement
Operation modes
The portable recorder has 3 operation modes: REC mode, PB mode and PC mode.
Press the [MODE] button to change the mode.
Press the
[POWER] button
for 2 seconds or
longer to turn on
the power.
<SDI mode>
Used when connecting the portable
recorder to a device that has an
HD-SDI output, for recording onto
the portable recorder's SD Memory
Card. This is suitable for operations
such as long backup recordings.
• Before switching between SDI mode and CAM mode, be sure to turn off
the power of the portable recorder. Connect or disconnect the camera
cable and then turn on the power again.
26
or
REC mode
AUDIO MON/ADV
REC/
PAUSE
<CAM mode>
Used when operating the
AG-MDC10G camera head
(optional) to shoot with the portable
recorder and record onto the SD
Memory Card.
Press the [MODE] button.
PB mode
Used for the playback of clips that are recorded
on the SD Memory Card.
Also, clip management operations, such as
deletion and protection, can be performed on the
thumbnail display screen.
Press the [MODE] button for 2 seconds or longer. "CHECK USB CABLE." is
displayed. Connect the portable recorder to the computer with a USB cable.
• Operation is not transferred to the PC mode when the AG-MDC10G
camera head is connected. When the AG-MDC10G is connected, turn
off the power, disconnect the camera cable, turn the power back on, and
then proceed with the operation.
PC mode
Used when connecting to a computer to perform
operations such as clip saving and editing.
While the power is off, connect the
AG-MDC10G camera head (optional) to the
portable recorder with the camera cable
(optional), and then press the [POWER] button
for 2 seconds or longer to turn on the power.
∗ Be sure to turn off the portable recorder's
power before connecting or disconnecting
the camera head.
AUDIO MON/ADV
REC/
PAUSE
* When both CAM
and SDI cables
are connected,
CAM mode has
precedence over
SDI mode. To record
in SDI mode, be
sure to turn off the
power, disconnect
the camera cable
(optional) then turn
on the power again.
Press the
[POWER]
button for 2
seconds or
longer
to turn off the
power.
Advertisement
Table of Contents
