Step 6 Television Operation - Panasonic DMR-T3040 Operating Instructions Manual

STEP 6 Television operation ca
1
D
L
— ri (5, POWER TV
OG CEX——— ovo, Tv
VCR Mm TVARDEO RECMOOE REC
TV/VIDEO
Numbered
+ —, VOLUME
You can control televisions by entering the remote control code.
1 Refer to the chart right for the code
for your television.
2 Press and hold [D, POWER TV] and
enter the two-digit code with the
numbered buttons.
e.g., 01, press [0] -» [1].
e Test by turning on the television and changing channels.
Repeat the procedure until you find the code that allows
correct operation.
e |f your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
e This remote control works with most recently manufactured
televisions, but may not be able to control older models.
oes
LNNENL T ASR
Cu
La
[e foe CS
[uw [mme
[w worse
m ow 1
SAMSUNG
SAMSUNG
E Operation
Point the remote control at the television.
[amem [omm
(Switch [DVD, TV] to *TV".)
[^ v. CH]
or
Numbered buttons
e.g.,
Channel! "5": [0] > [5]
[+ —, VOLUME]
Channels
Volume
Setti up un