Table of Contents
Advertisement
DMR-E65EE / DMR-E65GC / DMR-E65GCS / DMR-E65GN
8.2.
Special Modes Setting
Mode name
TEST Mode
Service Mode
Rating password
Forced disc eject
Child lock/unlock
NTSC/PAL system select To switch PAL/ NTSC alternately.
Forced power-off
Aging
Demonstration
lock/unlock
ATP re-execution
Item
Description
*All the main unit´s parameters (include tuner)
are initialized.
Setting every kind of modes for servicing.
*Details are described in "8. 3. Service Mode
".
The audiovisual level setting password is
initialized to "Level 8".
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
TimerREC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
Set or release "Child Lock".
When the power button is not effective while
power
is
ON,
turn
off
forcibly.*When Timer REC is ON or EXT-
LINK is ON, execute "Forced Power-off" after
releasing Timer RECor EXT-LINK.
Action:
The tray will open, and the power will turn off.
Perform sequence of modes as * Aging
Description shown below continually.
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray
and
not
released
by
initialization" of service mode.
Re-execute ATP.
FL display
The
display
before
leaves.
The
display
before
leaves.
Display in P-off mode.
the
power
Display following the then mode.
*When lock the tray.
"Main
unit
"LOCK" is displayed for 3 seconds.
*When unlock the tray.
"UNLOCK"
is
seconds.
*When press OPEN/CLOSE key
while the tray being locked.
Display "LOCK" for 3 seconds.
Display at ATP executing.
14
Key operation
Press [SKIP (REV)], [TIME SLIP]
and
[OPEN/CLOSE]
simultaneously for five seconds
when power is off.
When the power is off, press
[STOP],
[OPEN/CLOSE]
simultaneously for 5 seconds.
Open the tray, and press [SKIP
(REV)]
and
simultaneously for five seconds.
execution
When the power is off, press
[STOP]
and
simultaneously for five seconds.
Press [ENTER] and [RETURN] by
remote
controller
until [X-HOLD] is displayed.
execution
When the power is on (E-E mode),
press [STOP] and [OPEN/CLOSE]
simultaneously for five seconds.
Press [Power] key over than 10
seconds.
When the power is ON, press [CH
DOWN], TIME SLIP] and [OPEN /
CLOSE] simultaneously for over five
seconds and less than 10 seconds.
*The [REC MODE] should be set to
EP or LP.
*Whenthe
because of pressing keys for over
10 seconds, once turn off the
power,
and
command.
"When releasing Aging mode, press
[POWER] key.
When the power is on, press
[STOP]
and
simultaneously for five seconds.
When the power is on, press
[STOP]
and
simultaneously for five seconds.
displayed
for
3
Press [OPEN/CLOSE] key while the
tray being locked.
When the power is on (E-E mode),
press [CH UP] and [CH DOWN]
simultaneously for five seconds.
Front Key
keys
[TIME
SLIP]
and
keys
[SKIP
(FWD)]
[CH
UP]
keys
simultaneously
unit
has
hung-up
re-execute
this
[POWER]
keys
[POWER]
keys
Advertisement
Table of Contents
