Depth - Invacare Pronto M41 Owner's Manual

SECTION 8—FOOTBOARD ASSEMBLY

Depth

NOTE: For this procedure, refer to FIGURE 8.3.
1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame.
WARNING
Make sure the detent balls of the quick-release pin are fully released beyond the
outer edge of the tube before operating the wheelchair. Otherwise, injury and/or
damage may result.
Keep detent balls clean
2. Adjust footboard to one of three mounting positions.
3. Install the quick release pin. Make sure the detent balls are engaged with the outer
edge of the tube (Detail "A" of FIGURE 8.3).
Shroud
DETAIL "A" - TOP VIEW
Three Depth
OF FOOTBOARD
Adjustment Holes
Outer Edge of Tube
Detent Balls
Footboard
Assembly
Mounting
Hole
Quick
Quick
Detent Ball
Release Pin
Release Pin
FIGURE 8.3 Adjusting the Footboard Assembly - Depth
42
Pronto® M41 with SureStep® Part No. 1143206