SECTION 5—WHEELCHAIR OPERATION
SPJ™+ Joystick Switches and Indicators
NOTE: For the following information, refer to FIGURE 5.3.
SPJ+ Joystick
Joystick
Information
Gauge
Display
On/Off
Button
Decrease
Speedometer
Speed Button
(Tortoise)
Increase
DETAIL "A" -
Speed Button
FRONT VIEW
(Hare)
GREEN
Charger/
LED
Programming
Input
Service Indicator
FIGURE 5.3 SPJ™+ Joystick Switches and Indicators
On/Off Button
This button is located at the front of the joystick housing. It is used to turn the wheelchair
on and off, to remove the joystick from sleep mode (if programmed) and to lock or unlock
the joystick (if programmed).
Speedometer
The speedometer is used to show the maximum speed. The right‐most LED indicates
current maximum speed setting. The bottom left GREEN LED flashes to indicate that the
joystick is in speed limit mode. Speed limit mode limits the drive speed to a pre‐
programmed value, typically when the seat has been elevated and the wheelchair is
required to drive at 20% speed.
30
Pronto® M41 with SureStep®
Part No. 1143206