Replacing The Seat Positioning Strap - Invacare Pronto M41 Owner's Manual

Replacing the Seat Positioning Strap

ALWAYS wear your seat positioning strap.
The seat positioning strap is a positioning belt only. It is not designed for use as a
safety device withstanding high stress loads such as auto or aircraft safety belts. If
signs of wear appear, belt MUST be replaced immediately.
NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the two (2) mounting screws that secure the seat positioning straps to the seat
frame.
2. Remove the two (2) halves of the seat positioning strap from the rear seat frame.
3. Reposition the two (2) new seat positioning strap halves underneath seat rails.
4. Reinstall the two (2) mounting screws that secure the seat positioning straps to the seat
frame. Securely tighten.
Seat Lever
Seat
Positioning
Strap
Part No. 1143206
WARNING
FIGURE 7.4 Replacing the Seat Positioning Strap
Seat
NOTE: Semi‐Recline
Back seat shown.
Seat Positioning
Mounting Screws
39
SECTION 7—SEAT
Strap
Pronto® M41 with SureStep®