CITROEN C5 Handbook page 253

C5
4 HP 20 GEARBOX CONTROLS
Engines : XFX - 4HX
Selection control.
The gear selection control has 5 positions.
The selection lever is guided by the shape of the stepped gate and by a retaining spring which holds it
towards the left.
The gear selection control is equipped with the «shift lock», so you have to switch on the ignition and
apply the brake pedal to unlock the selection lever from the park position.
Selection (P) : Park (locking and immobilisation of the vehicle).
Selection (R) : Reverse gear.
Selection (N) : Neutral.
Selection (D) : Drive (Use of the four gears in their autoadaptive automatic function)
Selection (M) : Manual (M + M -) allowing the driver to select gears by pulling and pushing the gear
lever.
In position M, selection is by an electronic sensor located close to the gear lever.
The variation of flux necessary to the movement of the sensor cells is obtained by a magnet located on
the lever itself.
This enables the change of status.
B2CP3DKD
250