CITROEN C5 Handbook page 148

CHECKING AND SETTING THE VALVE TIMING
Refitting (continued).
Position the belt on the guide roller (13), belt at (C) well tensioned.
NOTE : Carefully turn the camshaft pinion in the opposite direction to the rotation of the
engine in order to engage the belt on the pinion.
B1EK00AD
Engage the belt on the LH exhaust camshaft pinion (17).
IMPERATIVE : The angular displacement value of the pinion relative to the timing
belt should not be greater than the width of one tooth.
Engage the belt on the LH inlet camshaft pinion (18), as before.
Refit the roller (12), tighten to 8 ± 0,8 m.daN.
B1EK00BD
Engine : XFW
145
C8