SPECIFICATION - IDENTIFICATION : SUSPENSION SPHERES
C5
Special features
Identification
- Fitting of new slimline spheres with multilayer membrane and earth grey colour.
- It is prohibited either to recharge or repair this type of sphere.
- The number marked on the suspension sphere is the reference number for the component, not the Replacement Parts No.
- The 2-digit number on the suspension sphere indicates the value of the initial inflation pressure.
Example :
Suspension
Day
Year
Time
Pressure rating
Batch
sphere marking
of manufacture
of manufacture
of manufacture
(Bars)
96 420 906 80
AG2
066
0
13.59
57
- The pressure rating of this type of suspension sphere is given merely as a guide.
- When checking, the value read could be higher than the nominal value.
NOTE : Suspension cylinders on the same axle should be equipped with the same type of membranes.
IMPERATIVE : Tightening torques for the spheres : 2.7 ± 0.5 mda.N.
311