CITROEN C5 Handbook page 122

CHECKING AND SETTING THE VALVE TIMING
Positioning the crankshaft.
NOTE : This operation positions all the pegs in their respective pegging points.
Peg:
- The camshaft pulleys, using tool [2].
- The crankshaft, using tool [1].
If this is not possible, reposition the flange (17).
B1EK1TBD
IMPERATIVE : This operation guarantees the setting of the timing for subsequent operations.
Slacken the screw (16) so as to free the crankshaft pinion (17).
Bring the flange (17) to the pegging point, using tool [5].
Position tool [1].
Tightening of screw (16) (Tool FACOM D360).
Tighten to
Angular tighten to
Remove tools [1], [2] and [5].
IMPERATIVE : When tightening screw (16), hold the pulley (17) in position, using tool [5].
B1EK1TCD
9
Engine : RFN 2003
: 4 ± 0,4 m.daN
: 53° ± 5°.
119
C8