CITROEN C5 Handbook page 128

CHECKING AND SETTING THE VALVE TIMING
Positioning the crankshaft.
NOTE : This operation positions all the pegs in their respective pegging points.
Peg:
- The inlet camshaft pulley, using tool [3].
- The crankshaft, using tool [1].
If this is not possible, reposition the flange (20).
B1EK1SRD
IMPERATIVE : This operation guarantees the setting of the timing for subsequent operations.
Immobilise the crankshaft, using tool [5].
Slacken the screw (19) so as to free the crankshaft pinion (16).
Bring the flange (20) to the pegging point, using tool [5].
Position tool [1].
Tightening of screw (19) (Tool FACOM D360).
Tighten to
Angular tighten to
Remove tools [1], [3] and [5].
B1EK1SSD
9
Engine : 3FZ 2003
: 4 ± 0,4 m.daN
: 53° ± 5°.
125
C8