CITROEN C5 Handbook page 180

CHECKING AND SETTING THE VALVE TIMING
Refit:
- The tool [5].
- The auxiliary drive pulley
Clean the threads of the pulley screw going into the crankshaft, (Tap M16x150).
Brush the screw threads.
Tightening torque for the screw:
Check the tightening: 26 ± 2,6 m.daN
Refit the auxiliary drive belt (see corresponding operation).
Remove tool [5].
Refit the closing plate, tighten to 0,7 m.daN.
Tighten the wheel bolts to 10 m.daN.
Complete the refitting in reverse order to removal.
Initialise the various ECUs.
B1EK0TVC
Engines : RHT - RHW - 4HW
Tighten to : 7 ± 0,7 m.daN (+ LOCTITE FRENETANCH)
Angular tighten : 60° ± 6° (Tool FACOM D360).
177
C8