C8
Refitting (continued).
Refit:
- The timing cover (9).
- The auxiliary drive pulley.
- The screws (7), tighten to 2,1 ± 0,2 m.daN.
- The timing cover (8).
B1EK1STD
- The RH engine support (6).
- The torque reaction rod (3).
Tighten:
- Screws (5) to 6 ± 0,6 m.daN.
- Nut (4) to 4,5 ± 0,4 m.daN.
- Screws (1) and (2) to 4,5 ± 0,4 m.daN.
Refit the auxiliary drive belt (see corresponding operation).
Continue the refitting operations in reverse order to removal.
B1EK1SUD
CHECKING AND SETTING THE VALVE TIMING
Engine : 3FZ
126
9
2003