Pci Status; Console Redirection - Fujitsu PRIMERGY BX620 S6 Operating Manual

Server menu
6.8.3

PCI Status

Shows the current status of the PCI adapters in the slots.
Slot x
Enabled
No errors were reported for this slot. The PCI adapter in this slot
can be used without restriction.
Failed
An error was detected for this slot. The PCI adapter in this slot
may have a problem.
Empty
There is no PCI adapter in this slot.
I
Once the problem has been eliminated or the PCI adapter has been
replaced, the setting must be manually reset from Failed to OK.
6.8.4

Console Redirection

Port Specifies the port for communication with the terminal (Serial 1 or
Disabled). The Disabled setting switches the terminal functionality off.
I
When set to Disabled the other items in this submenu disappear.
Protocol
Specifies the transfer protocol (ANSI, VT100, VT-UTF8, VT100+).
I
This item is only hidden if "Port" is set to Disabled.
Flow Control
Specifies how the transfer is controlled via the port. The setting (None,
XON/XOFF) must be the same at both the terminal and server.
I
This item is only hidden if "Port" is set to Disabled.
Continue C.R. after POST
Specifies whether communication with the terminal is also possible whilst
the operating system is being loaded (On) or not (Off).
I
This item is only hidden if "Port" is set to Disabled.
78 Operating Manual
BX620 S6