Fujitsu PRIMERGY BX620 S6 Operating Manual page 37

Installing the server blade
V
CAUTION!
Follow the safety instructions and information in section
with Electrostatic-Sensitive Devices" on page
The server blade boots automatically after installation in a
BX600 S3 basic unit with management blade S3.
If you install a BX620 S6 Server Blade in a BX600 S3 basic unit with
management blade S3 that is switched on, the server blade automat-
ically performs a Power On Self Test (POST), and then switches itself
off again.
The server blade must not be switched off during the automatic boot
process.
If the BX600 S3 basic unit is switched off when the server blade is
installed, the automatic POST is performed as soon as the basic unit
is switched on.
BX620 S6
Installing the server blade in the basic unit
Operating Manual
"Modules
28.
37