Installing the server blade in the basic unit
A
Figure 4: Installing the server blade
38
2
1
1
2
Operating Manual
Ê Release the locking mechanism of
the server blade handles by first
pressing on the green touch points
on the insides of the two handles
(1).
Ê Then rotate the release handles
outward (2) into the unlocked
position.
Ê Push the server blade as far as it
will go into the slot, holding the
release handles in the unlocked
position as you do this.
I
Make sure the server blade is
installed the correct way round.
The controls (A) must be
located in the area at the top.
BX620 S6