Peripheral Configuration - Fujitsu PRIMERGY BX620 S6 Operating Manual

Advanced System Configuration
Calls a submenu for configuring the PCI slots and PCI components on
the motherboard (see
Advanced Memory Options
Calls a submenu for specifying the memory properties (see
Advanced Processor Options
Calls a submenu for specifying the CPU properties (see
6.5.1

Peripheral Configuration

The "Peripheral Configuration" submenu contains the following items:
Serial
Use this input field to activate (Enabled) or deactivate (Disabled) the serial
port.
Serial Port 1 Address
Specifies the base I/O address and the interrupt for the serial port
(3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4, 2E8h/IRQ3).
I
This item does not appear if "Serial" is set to Disabled.
USB Speed
Specifies the speed at which the USB ports are operated.
USB 1.1
The USB 2.0 high speed host controller is deactivated.
USB 1.1 & USB 2.0
Both host controllers are activated.
USB Devices
Specifies which USB devices (None, Keyboard And Mouse Only, All) are to
be available after the boot process.
LAN Controller n
Specifies (for each controller) whether a port is activated by onboard LAN
Controller n, and if so, which port.
Disabled
No port is activated.
BX620 S6
page 67).
Operating Manual
Advanced menu
page 67).
page 68).
65